Tl DAC8760 PLC 16位模拟输出模块参考设计方案关键字:工业控制,可编逻辑控制器(PLC), DACTI公司的DAC7760和DAC8760是低成本全集成12位和16位数模转换器 (DAC),设计用于满足工业过程控制的要求,输出电流在4 mA?20 mA,0 mA- 20 mA或0 mA?24 mA或输出电压在0 V-5 V,0 V-10 V,±5 V,或±10 V,工作温度从 -40°C到+125°C,主要用在4 mA-20 mA电流回路,模拟输出模,建筑物白动化相关 设备,环境监测和可编逻辑控制器(PLC)?本文介绍了 DAC7760和DAC8760主要 特性,框图,DACX760输出模块(AO)框图和DACx760评估模块主要特性,框图, 电路图,材料清单与PCB元件布局图,以及PLC16位模拟输出(AO)模块参考设计 主要特性,电路图和材料清单.16-Bit Analog Output Module Reference Design for Programmable Logic Controllers (PLC)The DAC7760 and DAC8760 are low-cost, precision, fully-integrated, 12-bit and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices can be programmed as a current output with a range of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA; or as a voltage output with a range of 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V, with a 10% overrange (0 V to 5.5 V, 0 V to 11 V, ±5.5 V, or ±11 V). Both current and voltage outputs can be simultaneously enabled while being controlled by a single data register.These devices include a power-on?reset function to ensure powering up in a known state (both IOUT and VOUT are disabled and in a Hi-Z state). The CLR and CLR-SEL pins set the voltage outputs to zero-scale or midscale, and the current output to the low end of the range, if the output is enabled? Zero and gain registers can be programmed to digitally calibrate the device in the end system? The output slew rate is also programmable by register. These devices can superimpose an external HART signal on the current output and can operate with either a single +10-V to +36-V supply, or dual supplies of up to ±18 V. All versions are available in both 6-mm x 6-mm QFN-40 and TSSOP-24 packages.DAC8760主要特性: Current Output: 4 mA to 20 mA; 0 mA to 20 mA; 0 mA to 24 mA Voltage Output:0 V to 5 V; 0 V to 10 V; ±5 V; ±10 V0 V to 5.5 V; 0 V to 11 V; ±5.5 V; ±11 V (10% Overrange) ±0.1% FSR Total Unadjusted Error (TUE) MaxDNL: ±1 LSB MaxSimultaneous Voltage and Current OutputInternal 5-V Reference (10 ppm/°C, max)Internal 4.6-V Power-Supply OutputReliability Features:CRC Check and Watchdog TimerThermal AlarmOpen Alarm, Short Current LimitWide Temperature Range: -40°C to +125°C6-mm x 6-mm QFN-40; TSSOP-24 PackagesDAC8760 应用:? 4-mA to 20-mA Current Loops? Analog Output Modules? Building Automation RELATED DEVICES? Environment Monitoring? Programmable Logic Controllers (PLCs)? Field Sensors and Process Transmi Hers68图1. DAC8760框图 图2. DACx760输岀模块(AO)框图DACx760评估模块This user's guide describes the characteristics, operation, and use of the DAC7760 and DAC8760 (DACx760) evaluation boards (EMC-EVMs). This user's guide also discusses how to set up and configure the software and hardware, and reviews various aspects of the program operation. Throughout this document, the terms DAC8760EMC-EVM, evaluation board, evaluation module, and EVM are synonymous with the DACx760EMC-EVM. This user
关 键 词:
TIDAC8760PLC16 模拟 输出模块 参考 设计方案
链接地址: https://www.wenku365.com/p-43446159.html
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服点击这里,给天天文库发消息,QQ:1290478887 - 联系我们

本站为“文档C2C交易模式”,即用户上传的文档直接卖给(下载)用户,本站只是中间服务平台,本站所有文档下载所得的收益归上传人(含作者)所有【成交的100%(原创)】。本站是网络服务平台方,若您的权利被侵害,侵权客服QQ:1290478887 欢迎举报。

1290478887@qq.com 2017-2027 https://www.wenku365.com 网站版权所有