工程临时用电施工组织设计-(Clear)范文.doc

工程临时用电施工组织设计-(Clear)范文.doc

ID:58333397

大小:51.00 KB

页数:11页

时间:2020-04-15

工程临时用电施工组织设计-(Clear)范文.doc_第1页
工程临时用电施工组织设计-(Clear)范文.doc_第2页
工程临时用电施工组织设计-(Clear)范文.doc_第3页
工程临时用电施工组织设计-(Clear)范文.doc_第4页
工程临时用电施工组织设计-(Clear)范文.doc_第5页
资源描述:

《工程临时用电施工组织设计-(Clear)范文.doc》由会员上传分享,免费在线阅读,更多相关内容在工程资料-天天文库

1、本钢氧气厂8#制氧机工程临时用电施工组织设计一、工程概况:本工程名为本钢氧气厂8#制氧机工程,工程位于氧气厂8#制氧机主厂房附近,主要施工项目有:钢结构管廊及基础、分子筛区钢支架及基础、槽区管廊及基础、一次仪表房、8#制氧机外部道路砼、挡土墙及护栏等工程,钢结构工程最高22m,基础最深为-3.7m。二、供电总平面图(见图示)三、负荷计算:根据施工工地实际情况及有关电力设计手册,现场总需要系数Ki=0.65,cosôj=0.65,tgj=1.17。根据临时用电电源的位置及用电设备分部和现场条件等,确定总配电箱,分配电箱和开关的位置。1、用电设备容量换算:(1)调直机J02-223-43KWcos

2、j=0.86ô=0.84Pe=3.0KW(2)弯曲机Y112m-4380Vcosj=0.7ô=0.75Pe=4.0KW(3)切断机Y112m-43KWcosj=0.7ô=0.80Pe=3.0KW(4)刨床J02-223-2.0KWcosj=0.75ô=0.80Pe=3.0KW(5)电焊机BX-160-212KWA380VJC=55%cosj=0.87Pe=Se/(Jc+cos)=12/(0.55+0.87)=8.7KW(6)搅拌机Y132S-4380Vcosj=0.87.5KWPe=7.5KW(7)振动器系列:380V11KWcosj=0.85Pe=7.0KW(8)照明系统:碘钨2.0KW灯泡

3、1.5KWPe=7.0KW想到这里,他立即带上两个测工,肩扛手拎着仪器,硬是徒步走到了现场。sectionoftheDepartmentofprojectmanagement;Projectdocumentsandinformation:ProjectEngineeringDepartment;Materialsandequipment:materialsupplyprojects;Securitycontrols:theprojectDepartmentofsafetyandsecurity;Constructionmachinery:ProjectEngineeringDepartment

4、;Financial:ProjectManagementDepartmentoffinance;Securityandfireservices:projectsecurity.3.3.5managementrepresentativeandprojectmanagerinthisitemspecifiesthattheChiefEngineeristhemanagementrepresentative,responsiblefortheoperationofqualitymanagementsystemandsupervision,regardlessofhowhisotherresponsi

5、bilities,shouldhaveaclearmandateto:ensurethatthequalitymanagementsystemisimplementedandmaintained;Therunningofthequalitymanagementsystemtotheprojectmanager,includingneededimprovements;Alwaysbeawarethatthecustomer'sneedsandrequirements.3.43.4.1projectmanagementreviewshouldbeanannualreviewofitsquality

6、managementsystemtoensureitscontinuingsuitability,adequacyandeffectiveness.3.4.2Administrationreviewbytheprojectmanagerresponsiblefororganizationandimplementation,projectqualitycontrolDepartmentisresponsibleforspecifictasks.3.4.3themanagementreviewshouldcompareandevaluatethefollowinginput:internaland

7、externalqualityauditsandcorrectiveeffect;Customerfeedbackontheconstruction,installation,commissioning,serviceinformation(complaintsandsatisfaction);Qualityrecords,qualitycompliancewithtrendreports,ana

当前文档最多预览五页,下载文档查看全文

此文档下载收益归作者所有

当前文档最多预览五页,下载文档查看全文
温馨提示:
1. 部分包含数学公式或PPT动画的文件,查看预览时可能会显示错乱或异常,文件下载后无此问题,请放心下载。
2. 本文档由用户上传,版权归属用户,天天文库负责整理代发布。如果您对本文档版权有争议请及时联系客服。
3. 下载前请仔细阅读文档内容,确认文档内容符合您的需求后进行下载,若出现内容与标题不符可向本站投诉处理。
4. 下载文档时可能由于网络波动等原因无法下载或下载错误,付费完成后未能成功下载的用户请联系客服处理。