给排水注册工程师复习资料-排水复习参考题.pdf

《给排水注册工程师复习资料-排水复习参考题.pdf》由会员上传分享，免费在线阅读，更多相关内容在工程资料-天天文库。

1、《排水管网》复习参考题1.在进行城市排水系统设计时，雨水管道按流进行设计，合流管道按流进行设计。2.设计人口是指污水排水系统的人口数，是计算的基本依据。3.排水管渠设计规定最小流速和最大流速是为了。4.污水支管的布置形式一般有，，三种。5.每一设计管段的污水设计流量可能包括，

2、和三种流量。6.污水管道最小设计流速为，雨水管道最小设计流速为。7.污水管道设计对，，和做了规定。8.暴雨强度i的单位是，q的单位是，它们之间的关系是。9.暴雨强度公式用数学形式表达，，和

3、之间的关系。10.汇水面积上的平均径流系数应根据各类地面面积用法计算确定。11.污水出水口一般设在水位，雨水出水口一般设在水位。12.污水管道衔接方式通常采用和两种，雨水管道衔接方式通常采用。13.排水管道的接口，根据接口的弹性一般分为，和

4、三种形式。14.目前常用的管道基础有三种：基础，枕基，基础。15.排水管道带形混凝土管座基础的几种形式的采用受的控制。16.排水管渠清通方法主要有和两种。17.试述污水量的总变化系数K总的意义及其与K日，K时的关系。18.为什么污水管道按不满流进行设计？19.何谓排水系统的控制点？它常出现在管道系统的什么位置？遇到特殊情况如何处理？20.绘图说明排水系统总平面布置的一般

5、形式。21.绘图说明污水管道的埋设深度表示方式，最小覆土厚度应满足哪几方面的要求？22.溢流井用在什么排水体制？作用是什么？第一个溢流井上、下游管段设计流量如何确定？23.雨水管道水力计算对哪些设计数据做了规定？为什么？24.试写出我国通用的雨水暴雨强度计算公式并说明符号意义及单位。25.绘出截流式合流制排水系统示意图（注明各部分名称）。精品文档《排水工程》复习参考题一、填空：1.有机污染物排入河流后，经而大量消耗水中的，同时，空气中的不断溶入水中，河流的DO曲线呈状下

6、垂，故称。2.城市污水处理工艺中，粗格栅一般设在，其作用主要是，常用间隙为mm；细格栅一般设在，其作用主要是，常用间隙为mm。3.根据的性质、浓度及絮凝性能，沉淀可分为，，和4种类型。4.Q/A=q式中，q的物理意义为，单位为，q与u相

7、等，不同。5.活性污泥法的常用运行方式有：，，，和等。6.延时曝气活性污泥法的主要特点是：，，，。7.影响氧转移的主要因素有：，，，和

8、等。8.衡量曝气设备性能的指标有，和。9.间歇式活性污泥法的主要反应器--曝气池的运行操作，是由，，，和