思科、华为、h3c常用命令对比大全

思科、华为、h3c常用命令对比大全

ID:21090312

大小:38.48 KB

页数:27页

时间:2018-10-19

思科、华为、h3c常用命令对比大全_第1页
思科、华为、h3c常用命令对比大全_第2页
思科、华为、h3c常用命令对比大全_第3页
思科、华为、h3c常用命令对比大全_第4页
思科、华为、h3c常用命令对比大全_第5页
资源描述:

《思科、华为、h3c常用命令对比大全》由会员上传分享,免费在线阅读,更多相关内容在行业资料-天天文库

1、思科、华为、H3C常用命令对比大全思科、华为、H3C这些网络设备的命令还是挺多的,不过我们一般用的路由交换机设备都是最简单的了,先学基本命令,再学其他功能命令。路由命令是最基本的命令了。思科、华为、H3C常用命令对比大全  CISCO  H3C  HUAWEI  描述  no  undo  undo  取消、关闭当前设置  show  display  display  显示查看  exit  quit  quit  退回上级  hostname  sysname  sysname  设置主机名  en,configterminal  system-view  system-

2、view  进入全局模式  delete  delete  delete  删除文件  reload  reboot  reboot  重启  write  save  save  保存当前配置  username  local-user  local-user  创建用户  shutdown  shutdown  shutdown  禁止、关闭端口  showversion  displayversion  displayversion  显示当前系统版本  showstartup-config  display saved-configuration  display s

3、aved-configuration  查看已保存过的配置  showrunning-config  display current-configuration  display current-configuration  显示当前配置  nodebugall  ctrl+d  ctrl+d  取消所有debug命令  erasestartup-config  resetsaved-configuration  resetsaved-configuration  删除配置  end  return  return  退到用户视图  exit  logout  logout 

4、 登出  logging  info-center  info-center  指定信息中心配置信息  line  user-interface  user-interface  进入线路配置(用户接口)模式  start-config  saved-configuration  saved-configuration  启动配置  running-config  current-configuration  current-configuration  当前配置  host  iphost  iphost  host名字和ip地址对应  交换部分  enablepasswo

5、rd  setauthentication passwordsimple  setauthentication passwordsimple  配置明文密码  interfacetype/number  interfacetype/number  interfacetype/number  进入接口  interfacevlan1  interfacevlan1  interfacevlan1  进入vlan配置vlan管理地址  interfacerang  interfaceethIDtoID  interfaceethIDtoID  定议多个端口的组  enablese

6、cret  superpassword  superpassword  设置特权口令  duplex(half

7、full

8、auto)  duplex(half

9、full

10、auto)  duplex(half

11、full

12、auto)  配置接口状态  speed(10/100/1000)  speed(10/100/1000)  speed(10/100/1000)  配置端口速率  switchportmodetrunk  portlink-typetrunk  portlink-typetrunk  配置trunk  vlanID/novlanID  vlanbatchID/

13、undovlanbatchID  vlanbatchID/undovlanbatchID  添加、删除vlan  switchportaccess vlan  portdefaultvlanID  portaccesvlanID  将端口接入vlan  showinterface  displayinterface  displayinterface  查看接口  showvlanID  displayvlanID  displayvlanID  查看vlan  encapsulation  link-

当前文档最多预览五页,下载文档查看全文

此文档下载收益归作者所有

当前文档最多预览五页,下载文档查看全文
温馨提示:
1. 部分包含数学公式或PPT动画的文件,查看预览时可能会显示错乱或异常,文件下载后无此问题,请放心下载。
2. 本文档由用户上传,版权归属用户,天天文库负责整理代发布。如果您对本文档版权有争议请及时联系客服。
3. 下载前请仔细阅读文档内容,确认文档内容符合您的需求后进行下载,若出现内容与标题不符可向本站投诉处理。
4. 下载文档时可能由于网络波动等原因无法下载或下载错误,付费完成后未能成功下载的用户请联系客服处理。