1、PADS内电层分割与铺铜一、约定软件：PADS LAYOUT 9.3（PADS2007也可以参考通用步骤）二、一般步骤多层板的分割一般步骤为：定义叠层→设置层的属性（正、负片）→分配网络→分割→铺铜。首次定义多层板的叠层结构。四层板堆叠一般为：SIG1/GND/POWER/SIG2；六层板堆叠为：① SIG1/GND/SIG2/SIG3/POWER/SIG4； ② SIG1/GND1/POWER/SIG2/GND2/SIG3；在PADS当中板层定义如下图所示
2、： 其次，为电源层分配电源网络。 上图中强调一下“Plane Type”的问题。首先从工艺角度讲，内电层实物为薄薄的铜箔。在制造流程上有“正片”和“负片”之分。在PADS LAYOUT中，内电层属性配置当中，CAM PLANE为负片属性，其他两层为正片属性。以下部分是摘自PADS help文件：· No Plane— Prevents planes from being added to the layer. The No Plane layer is available for routi
3、ng. If you select No Plane, you can only create Copper and Copper Pour areas on the layer.· CAM Plane— Sets the entire layer to be solid copper and connected to only one net. The CAM Plane layer is a negative image, and the copper does not appear in
4、the design as it normally does for all other copper objects. You can not manipulate the shape/outline of the copper on this layer since it is generated automatically and covers the entire layer. This is an outmoded layer type. You can not route trace
5、s on a CAM Plane layer. Copper Pours and Plane areas can not be created on CAM Plane layers.· Split/Mixed Plane— Enables one or more planes on the layer, and enables routing on the layer. Routes can be placed within or without plane areas. Plane area
6、s avoid traces within their outline by a clearance area defined in the design rules. Copper Pours can not be placed on Split/Mixed layers. Plane areas are created on Split/Mixed plane layers and are similar to but more feature-packed than Copper Pour
